PLV100

SYSTEM Ver.0A.53-000-00.00 / 0B.3F-000-00.00 (ST2110 UNCOMP)

Support for connection with the SMPTE ST 2110
This function allows the AK-PLV100 to transmit directly over IP from the camera without a CCU.

To enable ST2110 (MoIP) function of AK-PLV100
Menu 　SYSTEM MODE > OPT MODE : [ST2110 UNCOMP]
(No activation is required.)
*However, [ST2110 UNCOMP] cannot be selected with SYSTEM FORMAT: 2180/**p.　
When detecting the PLV100 with network search tools such as ROP Setup software, there was a problem where the correct port number could not be detected, resulting in Port 80. This has been improved.

Download
Name	Software(Firmware) Update Data
Last Update	Feb. 20 , 2025
Model	AK-PLV100 GS AK-PLV100 MC/MS
Registered Name/Size	DP91000581A / 76.2 MByte DV91000722H / 178 MByte
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	SYSTEM Ver.0A.53-000-00.00 / 0B.3F-000-00.00 (ST2110 UNCOMP) Support for connection with the SMPTE ST 2110 This function allows the AK-PLV100 to transmit directly over IP from the camera without a CCU. To enable ST2110 (MoIP) function of AK-PLV100 Menu 　SYSTEM MODE > OPT MODE : [ST2110 UNCOMP] (No activation is required.) However, [ST2110 UNCOMP] cannot be selected with SYSTEM FORMAT: 2180/*p.　 When detecting the PLV100 with network search tools such as ROP Setup software, there was a problem where the correct port number could not be detected, resulting in Port 80. This has been improved. This update requires a two-step update. 1st Step: Installing IP migration version 2nd Step: Firmware update For details, please refer to the latest update procedure. Once updated, it cannot be downgraded.
Content	History of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)