PG50

Name

AJ-PG50 series Software (Firmware) Update Data

Last Update

Nov. 30, 2017

Model

AJ-PG50 AJ-PG50MC

Registered
Name/Size

VSI5989L / 50.7MByte

Transfer

Software

This software is update data for the applicable model above.

Content

Ver 33.69-

New Features

Main-line recording onto an SDXC/SDHC memory card available on the market, which is supposed to be for use in an urgent situation, has so far been restricted to the codecs at 50Mbps or less. But, to meet the users’ demand, this restriction is removed.
However, that is not to guarantee the recording and playback operations with SDXC/SDHC memory cards.
The following dongle are supported.
WLAN :D-Link DWA-171(Australia) , LTE :Verizon USB730L (US)

Improvement

The related menus are not displayed so that microP2 B cards are not CPS-formatted by mistake.
The cameras are designed to start installing the firmware update immediately after it is downloaded via P2 Cast, and an improvement is made to this current design. Menu item “Download Only” is added. This menu item can temporarily end the update process once the download is complete when the update command is received from P2 Cast.
In UDP transmission, the communication process of streaming format is improved.
P2 SS becomes unable to be connected, and this problem is fixed..
Improvement in stability at boot-up
System error may occur on rare occasions under the specific conditions, and this problem is fixed.

Hisotry of Release note

Preparation
for Upgrade

Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)

Download
Name	AJ-PG50 series Software (Firmware) Update Data
Last Update	Nov. 30, 2017
Model	AJ-PG50 AJ-PG50MC
Registered Name/Size	VSI5989L / 50.7MByte
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Ver 33.69- New Features Main-line recording onto an SDXC/SDHC memory card available on the market, which is supposed to be for use in an urgent situation, has so far been restricted to the codecs at 50Mbps or less. But, to meet the users’ demand, this restriction is removed. However, that is not to guarantee the recording and playback operations with SDXC/SDHC memory cards. The following dongle are supported. WLAN :D-Link DWA-171(Australia) , LTE :Verizon USB730L (US) Improvement The related menus are not displayed so that microP2 B cards are not CPS-formatted by mistake. The cameras are designed to start installing the firmware update immediately after it is downloaded via P2 Cast, and an improvement is made to this current design. Menu item “Download Only” is added. This menu item can temporarily end the update process once the download is complete when the update command is received from P2 Cast. In UDP transmission, the communication process of streaming format is improved. P2 SS becomes unable to be connected, and this problem is fixed.. Improvement in stability at boot-up System error may occur on rare occasions under the specific conditions, and this problem is fixed.
Content	Hisotry of Release note
Preparation for Upgrade	Copy the update file of the Software (Firmware) to an SD memory card. Software can be updated using this SD memory card. Please refer to the procedure in the site.(Printing out of the procedure is recommended.)