Download
Name	Software(Firmware) Update Data
Last Update	November 10, 2014
Model	AV-HS6000 P/E/MC (AV-HS60U1 P/E/MC,  AV-HS60U2 P/E/MC)
Registered Name/Size	VSI5907E / 47.3MByte
	© Panasonic Entertainment & Communication Co., Ltd.
Transfer	All Rights Reserved
Software	This software is update data for the applicable model above.
Content	Main Frame Ver 2.04 Major new features Operation 1. Multi Select Panel can display thumbnail images on its buttons. Also, wipe, settings, etc. can be assigned to them as desired. Assignment not allowed on Ver. 1. 2. MENU can display thumbnail images on itself. 3. MENU PANEL can display a picture, waveforms, etc. 4. From PC (Windows 7 / IE9) connected via LAN, the menu can be operated and video data can be transferred. These were only possible through SD card on Ver. 1. Video 5. Video format: 720/59.94p, 720/50p, 1080/25PsF and 1080/29.97PsF are supported. 6. Color correction function to video input and output 7. Up Stream Key: Key signal can be superimposed on video input signal before ME is applied to. 8. Video effects (Paint, Mosaic, etc.) can be added to the signal of the selected Bus. 9. Rotation effect can be added to PinP. 10. Util BUS: Sources can be added on the edge of KEY. 11. MV: SQ mode can be selected. Memory 12. EVENT MEMORY: A series of video effect settings can be chronologically saved and retrieved. 13. EVENTMEMORY LINK: EMEM playback can be controlled using Fader. 14. MACRO: A series of operations performed using Control Panel can be saved and retrieved. Video Memory 15. STILL: Images in BMP, TGA, GIF, TIFF and JPG formats are supported. 16. CLIP: Special playback modes are enabled. (Last/Lead/Loop, Reverse, Variable, Fader Link, Edit) Note For each of the following extended functions, separate software plug-ins are required to be added.  AUX IP, GVG Protocol, Serial Tally
	History of release note
Preparation for Upgrade	Copy the update file of the software (firmware) to an SD Memory Card to prepare the SD Memory Card for writing. Please update the software (firmware) of the unit by using this SD Memory Card for writing. Updating should be performed referring to the procedures separately put on the site. (It is recommended that the procedures should be printed out before updating.)