Download | |
Name | Software(Firmware) Update Data |
Last Update | 31 May 2012 |
Model | AJ-HPX3100G / HPX3100MC AJ-YDX30G / YDX30MC |
Registered Name/Size |
VSI5273G / 40.3MByte |
© Panasonic Entertainment & Communication Co., Ltd. | |
Transfer | All Rights Reserved |
Software | This software is update data for the applicable model above. When AJ-YDX30 is installed on AJ-HPX3100 and updating is performed with this data, the software of both AJ-HPX3100 and AJ-YDX30 is updated at a time. When AJ-YDX30 is not installed on AJ-HPX3100, only AJ-HPX3100’s software is updated. Please always apply the latest software version to both AJ-HPX3100 and AJ-YDX30. Software update takes approx. 50 - 60 min. Do not power down or pull card while updating. |
Content | AJ-HPX3100 Ver 31.64 1. Wireless LAN Function is improved. [Optional Products] Video Encoder Board AJ-YDX30G Wireless Module AJ-WM30 series Wireless LAN Upgrade Software Key AJ-SFU3100G series
The following WEB site shows the qualified environment by operating system Click here to see the Qualified environment of Wireless system. 2. AUTO REC Function supports TYPE3. REC operation of external devices such as a recorder, etc. connected to SDI OUT or MON OUT terminal can be controlled (on HD SDI output). Information about supported external devices can be found on the WEB site below. https://panasonic.biz/cns/sav/autorec_e/ 3. CAC File related functions are improved. 1) 32GB SDHC Memory Card is supported. 2) Canon’s new lens is supported. Make sure that the lens model you intende to use CAC. Click here to see the CAC Operation Lens table. |
AJ-YDX30 (Optional video encoder board ) PROXY FPGA 3.02- / PROXY SOFT 1.22- ・Wireless LAN Function is improved. (Please refer to the above update content of AJ-HPX3100G.) |
|
History of Release notes | |
Preparation for Upgrade |
Copy the update file of the software (firmware) to an SD Memory Card to prepare the SD Memory Card for writing. Please update the software (firmware) of the unit by using this SD Memory Card for writing. Updating should be performed referring to the procedures separately put on the site. (It is recommended that the procedures should be printed out before updating.) |