HPX3000

Download

Name

Driver Software(Firmware) Update Data

Last Update

Oct,10, 2008

Model

AJ-HPX3000

Registered
Name/Size

VSI4868E/34MByte

Transfer

Software

This software is update data for the applicable model above.

Content

1. Improvement of filter position display
ND/CC filter position display has been improved as follows.

Condition	Filter position	Displayed position of screen	Before update	After update
Power ON	NG	Center	No display	“CHECK FILTER” is displayed until the filter position is changed to right position.
Power ON	NG	Lower left	"-" is displayed	"-" is displayed and flashed on and off.
Filter select	NG	Center	"-" is displayed After a few seconds, display is turned off.	"-" is displayed After a few seconds, display is turned off.
Filter select	NG	Lower left	"-" is displayed	"-" is displayed and flashed on and off.

2. Remedy of PROX recording fail It is very rare that error occurs when recoding is stopped with following condition. This problem has been solved.
* PROXY data is recorded same time with AJ-YAX800G/MC.
*“AJ-YAX800G/MC: Video Encoder Card” is option.

History of Release notes

Preparation
for Upgrade

Copy the update file of the Driver Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)