Download
Name Driver Software(Firmware) Update Data
Last Update Dec,25, 2008
Model AJ-HPX2000,AJ-HPX2100
Registered
Name/Size		 VSI4757L/34MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content Attention: Please use Personal Computer with operation system of Windows or MacOS X 10.4 or before to unzip the software.
  1. Compatibility of Built-in Unislot Dual channel Wireless Receiver
  2. Improvement of filter poison display
  3. Improvement of “SHOT MARK” function
  4. Remedy of PROXY recording failure
  5. Improvement for Stability of clip copy in USB Device Mode
  6. Addition of “PROXY CARD ERROR” indicator
The details of Improvement
1. Compatibility of Built-in Unislot Dual channel Wireless Receive
The Built-in Dual channel Wireless Receive to be compatible with AJ-HPX2000/2100.

MIC/AUDIO2 menu "WIRELESS TYPE"
Items/ Data Saved Adjustable Range Remarks
WIRELESS TYPE SINGLE
/DUAL 		Select the type of wireless receiver.
SINGLE: Select a single channel wireless receiver.
DUAL: Select a 2-channel wireless receiver.

2. Improvement of filter poison display
 ND/CC filter position display has been improved as follows.
Condition Filter position Display position on the screen Before update After update
Power ON NG Center No display “CHECK FILTER” is displayed until the filter position is changed to right position.
Lower left “-” is displayed “-” is blinks.
Filter select NG Center “-” is displayed for a few second. “-” is displayed for a few second.
Lower left “-” is displayed “-” is blinks.

3. Improvement of “SHOT MARK” function
“SHOT MARK” function has been improved as follow.
Item Before update After update
“SHOT MARK” during recording pause Does not operate Push the “SHOT MARK” button during recoding purse, “SHOT MAR” is written on previously recoded clip.
Push the “SHOT MARK” button again, “SHOT MAR” is deleted from previously recorded clip.

4. Remedy of PROXY recording failure
It is very rare that error occurs when recoding is stopped under following condition.
This problem has been solved.
PROXY data is recorded at the same time by AJ-YAX800G/MC.
* “AJ-YAX800G/MC: Video Encoder Card” is option.

5. Improvement for Stability of clip copy in USB Device Mode
Stability of clip copy in USB Device Mode has been improved.

6. Addition of “PROXY CARD ERROR”
Following warning function have been added.
14. PROXY CARD ERROR
Display window Indication No display.
WARNING lamp Blinks 4 times per second for a period of about 3 seconds.
Tally lamp Blinks 4 times per second for a period of about 5 seconds.
Viewfinder The “PROXY CARD ERROR” indicator light up.
Warning tone It does not sound.
Warning description PROXY recording stops because of failure on either the video encoder card or the stream.
* When AJ-YAX800G/MC (Video encoder card. Optional) is attached.
Recording/ playback operation The unit continues to operate.
Countermeasures Check the video encoder card (AJ-YAX800G/MC) or avoid use of proxy recording.
History of Release notes
Preparation
for Upgrade		 Copy the update file of the Driver Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)