Download
Name Driver Software(Firmware) Update Data
Last Update Jun,30 2008
Model AJ-HPM110
Registered
Name/Size		 VSI4805C/28.5MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
  1. 9P remote operation
    Functions of output picture selection have been changed.
    SEEK function have been changed. * For the detail, refer to the second pages.
    Item Setting Setting and brief function description
    202 ID SEL ORIG When[ORIG] is selected, a STOP command transferred via 9P remote during thumbnail playback results in STILL(SHTL+0.0).The STANBY OFF command engages the STOP mode ande resumes thumbnail playback.
    102 FF,REW MAX SEEK When SEEK isselected, FF and REW operations for FF and REW commands transfeered via 9P and 1394 are performed at 100x nomal speed. Note that seek operations initiated by the FF and REW commands via 9P behave differently when ORIG is set in menu No.202 ID SEL. The cursor moves to left or right in thumbnail screens.
  2. * Only AJ-HPM110MC
    Factory setting value of audio headroom change.
    Factory setting value of following item on AUDIO menu has been upgraded.
    Item Setting Settings and brief function description
    776 : REF LEVEL FS-18 → FS-20 Specifies the standard level.
Preparation
for Upgrade		 Copy the update file of the Driver Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)