Download
Name Software(Firmware) Update Data
Last Update July,16, 2009
Model AG-HPG20
Registered
Name/Size		 VSI4950F/21MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
  1. Supports P2 Card E series
  2. When selecting "TYPE 3" on AUTO REC Function, it does not start recording depending on the recording signal from camera recoder. The problem has been solved.
    *About AUTO REC function
    Perform the AUTO REC /STOP according to the recording /stop signal of HD-SDI input signal sent from the external camera recoder. 
    [Setting menus] : 
    RECORDING SETUP>AUTO REC > TYPE 3 (*Factory mode setting is "OFF")
Preparation
for Upgrade		 Attention: Please use Personal Computer with operation system of Windows or MacOS X 10.4 or before to unzip the software.
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)