Fixing the problems with NDI|HX mode operation

1. Frame dropping occurs in IP streaming transmission. This problem is fixed.
    • The process with high load is improved so that it will be performed at an appropriate processing speed.
   1. Priority of the encoder’s task is changed to improve the processing speed.
   2. Unnecessary process to suppress the bit rate is removed.
   
    • Optimization of NDI|HX driver (supplied from NewTek)
   1. The streaming protocol is changed from TCP to UDP so that NW processing load is reduced.
   2. Transmission intervals between control commands for cameras are corrected.


2. There is a difference in angle of view between NDI|HX proxy and main line videos. This difference is corrected.

 Caution

1.   The latest NDI|HX Driver need to be installed.
2. When you use your camera together with NDI|HX-compatible devices, please do not connect it with any applications or devices which utilize JPEG transmission. That may cause frame dropping.

AW-HN130 W/K
CPU SOFTWARE
 Camera Main V 02.01
 Network V 02.31
 Servo (Pan/Tilt) V 1.01
 Interface V 02.00
FPGA
 Lens V 1.02
EEPROM
 Interface V 1.00

(Bold: update software )