|
Download
|
|
Name
|
Software(Firmware) Update Data
|
|
Last Update
|
Oct., 18, 2023
|
|
Model
|
AK-HC3900G/GS
AK-HC3900MC/MS
|
Registered
Name/Size
|
DV91000551J /60.5 MByte
|
|
|
© Panasonic Entertainment & Communication Co., Ltd.
|
|
Transfer
|
All Rights Reserved
|
|
Software
|
This software is update data for the
applicable model above.
|
|
Content
|
| Firmware Version |
|
| SYSTEM |
0A.B9- |
| CAM FPGA |
2.03- |
| AVIO FPGA |
1.30- |
| CPU FPGA |
5.7A- |
| CAM MAIN |
2.0C- |
- Support for connection with the SMPTE ST 2110
This function allows the AK-HC3900 to transmit directly over IP from the camera without a CCU.
- To enable ST2110 (MoIP) function of AK-HC3900
- Purchase software key AK-SFC391.
AK-SFC391:Activation key code to enable ST 2110 function for AK-HC3900
- Connect AK-HC3900 to a PC equipped with the app EasyIP SetupTool Plus 1.4.9.
- Activation of MoIP function with EasyIP SetupTool Plus 1.4.9.
- After activation, if the camera would be connected directly to the ST2110 system using an optical
cable,
change the menu below*
MENU > SYSTEM MODE > OPT CONNECTION : ENABLE
*If "OPT CONNECTION" is set to "ENABLE", do not connect the camera's optical cable to a CCU.
Set to "DISABLE" when connecting the camera to the CCU.
When "OPT CONNECTION" is set to "ENABLE"
| Firmware Version |
|
| SYSTEM |
0B.4A- |
| CPU FPGA |
06.0B- |
|
|
History of Release note |
Preparation
for Upgrade
|
Copy the update file of the Software
(Firmware) to an SD memory card.
Software can be updated using this SD
memory card.
This update requires a two-step update.
1st Step: Installing IP migration version
2nd Step: Firmware update
Please refer to the update procedure in the site.(Printing out
of the procedure is recommended.)
|