Download
Name Software(Firmware) Update Data
Last Update May 13 , 2013
Model AK-HC3800G
AK-HC3800GS
AK-HC2500MC
AK-HC2500MS
Registered
Name/Size
VSI5576F /3MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content

AK-HC3800 series Ver2.00
CAM 2.00-00-0.00
CAMERA SOFT 2.01-00-0.00

These are supported with the firmware.

No. Supported / Improved item AK-HC3800
(Camera)
AK-HCU200
(CCU)
AK-HRP200
(ROP)
Video
1 720p is supported for AK-HCU200 video input / output.    
2 Support for 1080-25/30P
3 Support for Chroma Gain Adjustment
4 Support for Color Temperature Adjustment
5 Support for Color Temperature Display  
6 Support for G GAIN adjustment of White Balance    
7 Support for GAMMA Characteristics
8 Items for setting CINEMA GAMMA Characteristics are changed.
9 When GAMMA is turned OFF, BLACK GAMMA is also turned OFF at the same time.    
10 Support for DNR Adjustment    
11 Improvement of DARK DTL    
12 Improvement of ALC    
Setting
13 Menu for reading and writing the Scene Files, etc. is added.
14 AWB data can be stored in Scene File.    
15
AK-HC3800/2500 is enabled to initialize itself.    
Correction
16 Correction concerning ABB and TALLY/CALL button    
17 Correction of Defective Display of Lens File    
IP connection
18 Support for Internet Explorer 9 (Windows7)    
19 Support for account management for IP connection    
20 Support for Connection Status Display between AK-HRP200 and AK-HCU200    
21 Support for IP Connection between AK-HCU200 and AK-HRP200  
Connection of AK/AW cameras
22 Support for IP Control of AW cameras    
23 Support for Serial Control of AK / AW cameras    
Connection of traditional models
24 Support for Control of AK-HC3500 / AK-HCU3550    
25 Support for Control of AK-HC3800 / AK-HCU200 from AK-MSU935*
* AK-MSU935 also needs to be updated.
 
26 Support for Control of AK-HC3800 / AK-HCU200 from AK-HRP935*
* AK-HRP935 also needs to be updated.
 


Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)