Download
Content
AG-YAGH Ver 1.1
Following functions are available to support the upgrade of GH4 firmware ver.2.1 or higher.
  1. Timecode can be embedded to the HDMI output signal.
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  2. RSS (Recording Start/Stop) signal can be embedded to the HDMI output signal.
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  3. FHD at 30p/25p native output via HDMI is available while recording video in FHD at 30p/25p.
  4. FHD at 30PsF / 25PsF output via SDI is available while recording video in FHD at 30p/25p.

pdf  Go to the firmware update service notice page.

 
Preparation
for Upgrade		 Copy the update file of the Software (Firmware)
 Extract the ZIP package, and then copy the extracted two firmware (“.ebn” file for AG-YAGH and “.bin” file for AG-GH4) to the root (upper directory) of the SD memory card.

Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)