Download
Name Software(Firmware) Update Data
Last Update January 26, 2015
Model AG-GH4
AG-YAGH
Registered
Name/Size		 AH4__V21.zip / 42.3MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
AG-GH4 Ver 2.1
  1. Timecode can be embedded to the HDMI output signal.
    ・Selectable in Motion Picture menu:[Time Code]>[HDMI Time Code Output]
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or
    the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  2. RSS (Recording Start/Stop) signal can be embedded to the HDMI output signal.
    ・Selectable in Motion Picture menu:[HDMI Rec Output]>[HDMI Recording Control]
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or
    the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  3. FHD at 30p/25p native output via HDMI is available while recording video in FHD at 30p/25p.
    　・Selectable in Motion Picture menu:[HDMI Rec Output]→[1080/30p Set.] or [1080/25p Set.]
  4. Playback performance of recorded 4K video is improved.
  5. [Time Lapse Shot] Program is fixed to start recording at the designated time even when [summer time] is set.

AG-YAGH Ver 1.1
Following functions are available to support the upgrade of GH4 firmware ver.2.1.
  1. Timecode can be embedded to the HDMI output signal.
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  2. RSS (Recording Start/Stop) signal can be embedded to the HDMI output signal.
    *Available when AG-GH4 or AG-YAGH are connected with the products of ATOMOS Global Pty. Ltd. or the products complying with the extended specifications of ATOMOS Global Pty. Ltd..
  3. FHD at 30p/25p native output via HDMI is available while recording video in FHD at 30p/25p.
  4. FHD at 30PsF / 25PsF output via SDI is available while recording video in FHD at 30p/25p.

pdf  Go to the firmware update service notice page.

 
History of Release notes
Preparation
for Upgrade		 Copy the update file of the Software (Firmware)
 Extract the ZIP package, and then copy the extracted two firmware (“.ebn” file for AG-YAGH and “.bin” file for AG-GH4) to the root (upper directory) of the SD memory card.

Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)