Download |
Name |
AU-EVA1 MC /PX Software (Firmware) Update Data |
Last Update |
Aug. 30, 2018 |
Model |
AU-EVA1MC AU-EVA1PX |
Registered Name/Size |
DV91000107N / 29.7 MByte Expected Time for Update
Approx. 3min |
|
© Panasonic Entertainment & Communication Co., Ltd. |
Transfer |
All Rights Reserved |
Software |
This software is update data for the applicable model above. |
Content |
Ver. 2.52-
- The firmware is improved so that the “CHECK CARD” warning is displayed
if there is a difference between the information detected in the card
slot and the information inside the SD card when it is inserted in the
slot, and the recording won’t be started in error.
Details
- When a UHS-II SD card is inserted in the card slot, it may not be
correctly detected as UHS-II on occasions (= pushing it for more than
one second, etc.). In this case, it is detected as a card with a write
speed of less than 400Mbps.
- So, if the format is set to 4K/UHD 422 All-I 400M and the recording
is started, an error will occur in a few minutes and the recording will
stop. To address this problem, the specification has been improved as
described above.
|
History or Release note
|
Preparation for Upgrade |
Copy the update file of the Software (Firmware) to an SD
memory card. Software can be updated using this SD memory card. Please
refer to the procedure in the site.(Printing out of the procedure is recommended.) |