Download
Name AG-AC30 series Software (Firmware) Update Data
Last Update Nov. 20, 2017
Model AG-AC30
Registered
Name/Size
TC58NYG0H16F / 53.6 MByte 
Expected Time for Update Approx. 3min
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content Ver. 1.04-
  1.  After a test tone is output, if you switch to camera mode and start recording, on rare occasions periodic noise is recorded. This problem is fixed.
  2. If the recording is not completed correctly due to a power interruption or others, the clip will be repaired automatically by rebooting the camera.
    But, if the card is in the different slot from the one used in this incomplete recording and the auto-repair process is started, the damaged clip (MOV/MP4 file) will be deleted.
    This will not occur on files except MOV/MP4 mode. This problem is fixed.
  3.  Error is corrected in calculation method for remaining capacity in VFR recording(120fps).

History of release note
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)