Download
Name AJ-PX270 series Software (Firmware) Update Data
Last Update January 16, 2017
Model AJ-PX270 series, AJ-PX298MC, AJ-PX285MC
Registered
Name/Size
VSI5951U / 51.2MByte 
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 35.94-

New Features

  1. High-speed transmission by bonding equipment is supported.
    Securing the frequency band for streaming, displaying the information on the OSD sent from the bonding equipment, communicating the equipment information to P2 Cast, etc.
  2. A menu is added to take GPS information from external equipment and put it into the Metadata (XML) of the contents.
    Menu Item: GPS: INTERNAL / EXTERNAL / OFF
  3. The following LTE USB Modems are supported.
    • K5160 (UK and Greece)
    • MF831 (Finland)
    Connection confirmed 4G/LTE Modem

Improvement

  1. The following problems, which occur when using AJ-WM50 wireless module, are fixed.
    • When executing a web app in Direct mode between an Apple device (Mac, portable terminal, etc.) and P2 equipment, they may get disconnected.
    • When performing FTP transfer, the GUI does not work correctly.
  2. If an SD card is write-protected, its user file cannot be loaded.This problem is fixed.
  3. Regarding the information display on P2 Cast screen, the following problems are fixed.
    • The status of the camera is displayed as offline.
    • The status information of Play List Export is not updated.
  4. Regarding the streaming in P2 Cast mode, the following problem is fixed. If the camera is set to the settings below, incorrect streaming is performed. 
    − StreamingMode:AVC-G(QoS)
    − QoS Max/Min Rate: 6Mbps

History of release note
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)