Download
Name POVCAM
Software (Firmware) Update Data
Last Update Nov. 24, 2022
Model Recorder: AG-MDR25
Camera Head: AG-MDC20
Registered
Name/Size
DV9100007_M / 79.0 MByte 
Expected Time for Update Approx. 3min
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content Ver. 1.19-

   HDMI monitors without audio input function can be used now.

  1. When connecting a monitor without audio input function to the HDMI terminal and recording the SDI IN input, that is, when not using the camera head, the following problems may occur.
    1. If the cable of the SDI IN terminal is disconnected and then connected, the HDMI monitor will not be able to display.
    2. If recording is paused, automatic recording will not start.
    3. Automatic recording function: If a cable is connected to the SDI IN terminal during recording, recording will be paused and resumed after G/L is established.
  2. The internal processing has been improved to fix this problem.

History of release note
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)