| Download | |
| Name | Software(Firmware) Update Data |
| Last Update | December 12, 2013 |
| Model | AJ-HPX3100G / HPX3100MC AJ-YDX30G / YDX30MC |
| Registered Name/Size |
VSI5273K / 43MByte |
| © Panasonic Entertainment & Communication Co., Ltd. | |
| Transfer | All Rights Reserved |
| Software | This software is update data for the applicable model above. When AJ-YDX30 is installed on AJ-HPX3100 and updating is performed with this data, the software of both AJ-HPX3100 and AJ-YDX30 is updated at a time. When AJ-YDX30 is not installed on AJ-HPX3100, only AJ-HPX3100fs software is updated. Please always apply the latest software version to both AJ-HPX3100 and AJ-YDX30. Software update takes approx. 50 - 60 min. Do not power down or pull card while updating. |
| Content | December 12, 2013 PROXY SOFT 2.14 This update is to Improvement stability. May 21, 2013 AJ-HPX3100 Ver 38.30 PROXY SOFT 2.13 The following improvement is enabled by this update. 1. Compatibility with microP2 Card 2. The remaining battery level is indicated in percentage when a battery with this function is installed on the unit. 3. Support for iOS6 (iPad/iPod touch/iPhone) in network function. [Optional Products] Video Encoder Board AJ-YDX30G Wireless Module AJ-WM30 series Wireless LAN Upgrade Software Key AJ-SFU3100G series |
 AJ-YDX30 (Optional video encoder board )+ This update is to improve stability of encode process. |
|
| History of Release notes | |
| Preparation for Upgrade |
Copy the update file of the software (firmware) to an SD Memory Card to prepare the SD Memory Card for writing. Please update the software (firmware) of the unit by using this SD Memory Card for writing. Updating should be performed referring to the procedures separately put on the site. (It is recommended that the procedures should be printed out before updating.) |