Download
Name Software(Firmware) Update Data
Last Update Jul. 10, 2017
Model AW-HE40S W/K P/ AW-HE40H W/K P
AW-HE40S W/K E/ AW-HE40H W/K E
AW-HE65S W/K MC/ AW-HE65H W/K MC
AW-HE48S K/W MC
AW-HE58S K/W MC AW-HE58H K/W MC
AW-HE35S K/W ED
AW-HE38S K/W ED AW-HE38H K/W ED 
Registered
Name/Size		 TC58NYG0K15Q/ 47.4MB
Update Tool / VSI6208B
© Panasonic Entertainment & Communication Co., Ltd.
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Ver 1.54
  • The following symptoms may occur on rare occasions. So the internal processing is improved by the update.
    • The camera may not boot up in spite of the power supplied to it.
    • The initial setup motion (to detect the starting point for pan-tilt position) will not start. (LED is lit in orange, indicating the camera is in the power-on and standby state.)
    •  No HDMI/SDI signal is output. 　
    • Pan/Tilt operations may not work when the camera is operated using USB VIDEO CLASS.

History of release note
Preparation
for Upgrade
Download firmware file.
Connect the Windows PC to AW-HE40 /HE65 via LAN.
Start the Update Tool and access the AW-HE40 /HE65.
Assign the firmware file and update it according the update procedure.

<OS>
Windows7
Windows8.1
Windows10