Download
Name Software(Firmware) Update Data
Last Update Nov. 6 , 2017
Model AK-HC5000G/GS
AK-HC5000MC/MS
Registered
Name/Size
VSI6140Q /32.0MByte
Copyright Copyright © Panasonic Corporation
Transfer All Rights Reserved
Software This software is update data for the applicable model above.
Content
Firmware Version  
CAM MAIN 4.22-
NETWORK 3.01-
ROM TABLE 1.01-
CAM FPGA 8.01-
AVIO FPGA 8.24-
INCOM FPGA 3.01-
  1. HDR-PAINT: Function that allows adjusting the Gamma curve when HDR is applied
    ・Variable menus are added for BLACK GAMMA and KNEE in HLG MODE.
    ・Variable menus are added for GAIN and CLIP in SDR CONVERT MODE.
  2. SHOCKLESS WB: Function that makes WB shockless when COLOR TEMP is changed
    ・ON/OFF selection and SPEED setting menus are added for SHOCKLESS WB.
  3. Variable range of M.PED is extended.
    ・Selection item to double the variable amount is added to MASTER PEDESTAL RANGE menu.
  4. Variable range of MASTER BLACK GAMMA is extended.
    ・Setting range of MASTER BLACK GAMMA is changed from ±32 to ±48.
  5. Focus Assist and other functions are added to USER SW assignable features.
  6. For HDR output, COLORIMETRY (= YC MATRIX: BT.709/BT.2020) switching menu is added.
etc. For details, please refer to the latest Operating Instructions. 

 

History of Release note
Preparation
for Upgrade
Copy the update file of the Software (Firmware) to an SD memory card.
Software can be updated using this SD memory card.
Please refer to the procedure in the site.(Printing out of the procedure is recommended.)