VariCam series Software
AU-V35C1/AU-V23HS1/AU-VREC1

NOTE : After AU-V35C1 is updated to Ver. 4.01 or higher no matter which version it is updated from, please be sure to perform INITIAL ABB according to the procedure.

Performing INITIAL ABB is not limited to immediately after the update. It can be redone many times.
Please be careful because, if it is not successfully completed, the product will not work correctly when you use it.

Please be careful not to turn off the power during the update process. If the update process is not completed *, please reboot the camera recorder without ejecting the SD memory card. The interrupted process will be resumed. (* An error is displayed or the update progress bar is stuck for one hour or more)

VariCam series Software
AU-V35C1/AU-V23HS1/AU-VREC1 Ver. 6.00-00-0.06

Viewfinder AU-VCVF1 is required to update the latest version. 1.09